The Tarot Pro Pumps 160W with the New Omni Chipset
Vaporesso continues to blow us away with truly innovative designs for every component of your vape gear. With the Tarot Pro they add new functionality to VW and TC settings. As an advanced setting to VW, CCW stands for Customized Curve of Wattage. You can customize the curve of wattage, according to its respective second of time, up and down in a pattern with this setting (if you picture a typical wave form, it allows for lowering the peaks or raising the valleys in one second intervals). During the first 5 seconds, you can adjust them every half second, to reduce ramp up time.
As an advanced setting to VT, CCT stands for Customized Curve of Temperature. Again addressing the annoyance of the first draw not being hot enough, you can set the unit to start vaping at one temperature and drop by X degrees after so long. This also helps avoid burnt tongue because you’re not running it too high based on first puffs.
Smart VW recognizes your atomizer and makes a suggestion for the optimal output setting. If you override the suggestion it will save your new setting and return to that each time that resistance coil is attached, even after power offs.
With all that being said, we’re not going to go into every safety feature and design detail here. A link to a full page outline at Vaporesso is provided. The unit requires two 18650 batteries sold separately.
- Size: 93 x 57 x 23mm
- Output: 5-160 Watts
- Output Modes: VW, VT(Ni, SS, Ti), TCR, BYPASS, CCW, CCT,
- Smart Temperature Control Range: 100-315°C/200F-600F
- Firmware Upgradable and Customizable
- Compatible Battery: 2 x 18650 (Not included)
Way Smarter than your Average Mod