The iPV 5 200W Temperature Control Mod by Pioneer4you is Shipping!
Following on the heels of the much loved iPV3 Pioneer4You introduces the latest in personal vaporizer mods, the iPV5 200W TC. While the iPV3 employed the YiHi SX330-V3SL chip the iPV5 200W TC uses the YiHi SX330-200. Beyond the fact that it now supports 200 Watts compared to the 165 with the SX330-V3SL we don’t have too many technical details on the chips latest upgrades.
Pumping any where from 10 Watts to 200 Watts and 10J-100J (joules) – 120j for titanium coils – it would be fair to call this puppy a powerhouse. The iPV5 200W will handle atomizers down to 0.15 Ohm and up to 3.0 Ohm.
Designed to compete head on with the likes of the KBox from KangerTech and the Sigelei FUCHAI 200W the IPV5 takes (2) 18650 cells (not included) and is firmware upgradeable via USB.
Supporting Ni, Ti and SS coils for Temperature Control with a clear and easy to use interface, the iPV5 is also a beautiful piece of design. Controls and OLED are located together at the front side and setting and remembering your settings is easier than ever.
The iPV 5 200W TC at a glance…
- 510 Threaded
- Output Power: 10W-200W
- Output Joule: 10J-100J/ (120J for Titanium)
- Standard Resistance: 0.15ohm-3.0ohm
- Joules Mode Resistance: 0.05ohm-1.5ohm
- Output Voltage: 1.0V-7.0V
- Input Voltage: 6.4V-9.0V
- Output Current: 1.0A-45.0A
- Input Current: 1.3A-45.0A
- Temp. limit Centigrade: 100°C-300°C
- Temp. limit Fahrenheit: 212°F-572°F
- Powered by YiHi SX330-200
The iPV5 200W TC comes with…
- 1 x IPV5 200W
- 1 x User manual