Eleaf iStick Pico Dual with Melo 3 Mini Starter Kit


With Buck Boost

Out of stock

***Best Buy!*** Pico Dual 18650’s do Double Duty

eLeafs’ Pico Dual handles two 18650 cells (sold separately) for a maximum output of 50 amps and 200 watts to satisfy just about any vaping style. With a range of 0.1 to 3.5 ohms resistance in Bypass (VW) mode and 0.05-1.5 ohm in temperature control modes the Pico Dual handles Ni, Ti, and SS wires in TC and TCR with 3 memory settings and 510 compatible tanks up to 25mm in diameter. The new Pre-Heat function can be enabled to jump start your coils with an added punch of power when the button is pressed. An extra burst of power to the coils heats them up fast for a much fuller vape. “Buck Boost” is a technology that bucks the trend to lower output as resistance increases, maintaining the full 200W up to 0.4 ohms and dropping off much slower than the competition.

eLeaf is addressing convenience issues with external chargers for dual cell mods by introducing the Avatar, a new balanced trickle charge USB connection rated at 1.5 Amp. An external charger will still get you back in business faster but now you can get a jump start anywhere there’s a wall plug or USB connection. On the flip side, if you’re in the middle of nowhere and your cell phone is dying, your mod will save the day with pass-through support. Plug the mod to the phone and you’ll be making calls and charging the phone immediately.

The Pico Dual with Melo 3 starter kit comes with the Melo III Mini tank, a top-fill – bottom air design with a 2ml e-juice capacity and 22ml diameter. A 0.3 ohm and 0.5 ohm coil head are included with the kit. Many Melo users opt for a Vaporesso ceramic cCell replacement coil since Melos’ are Atlantis compatible.

The iStick Pico Dual Starter Kit at a glance…


  • Dimensions: 46mm x 44mm x 119mm
  • 510 Threaded
  • Comfortably Fits 25mm and Lower Tanks
  • Operating Wattage: 1 – 200 W
  • Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
  • Temperature Control: 100 – 315C / 200 – 600 F
  • Bypass (Direct Output Voltage) Mode
  • Resistance: 0.1 – 3.5 ohm in Variable Wattage/Bypass Mode
  • Resistance: 0.05 – 1.5 ohm in Temperature Control mode
  • OLED Display Screen
  • Preheat Functionality
  • New Power Bank Feature
  • Ventilation Holes for Improved Heat Dissipation
  • Adjustment Buttons located on the Bottom of the Device
  • Firmware Upgradeable
  • New Balanced Trickle Charge System
  • Requires (2) High Amp 18650 Batteries (Sold separately)
  • Micro USB Charging Port (Micro USB Cable included)
  • *External charger recommended for faster charging speeds*
  • Dual Circuit Protection
  • Reverse Polarity Protection

Melo III:

  • Dimensions: 2-1/4″ x 7/8″ (Including Drip Tip and Threads)
  • 22mm Diameter
  • 510 Threaded
  • 2.0ml liquid Capacity
  • 304 Stainless Steel Construction
  • Glass Tank
  • Invisible Adjustable Airflow Control Valve
  • Convenient Top-Fill Feature
  • 100% Pure Cotton Atomizer Heads
  • Uses Eleaf EC, EC-TC Nickel, or EC-TC Titanium Atomizer heads

The iStick Pico Dual Starter Kit comes with…

  • 1 x Eleaf iStick Pico Dual Mod
  • 1 x Eleaf Melo 3 Mini Tank
  • 1 x Eleaf EC Kanthal 0.3 ohm Atomizer head (Preinstalled)
  • 1 x Eleaf EC Kanthal 0.5 ohm Atomizer Head
  • 1 x Spare Bag of O-rings
  • 1 x QC USB Cable
  • 1 x RC Adapter

Big Power and Powerful New Features in the iStick Pico Dual Kit

Additional information


Black, Cyan, Grey, Red, Silver, White


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.